Filter
Top Products
DVR (Recording)
Recording & Playback Navigator (Cont’d)
Programming a Recording with
the
Recording & Playback
Navigator
1
Press PROGRAM RECORDINGS.
The Programmed Recordings Screen will appear.
2
Using / / / ,select the desired cell.
• For example, to record from 4:00 pm in two days
from the present day, choose the cell as follows.
There are two ways to program a recording.
1) Direct Program---Press CHANNEL / or
the Number Buttons to select a channel. Press
ENTER.The cell turns pink indicating that the
timer programming is now set in that cell.
Press
PROGRAM RECORDINGS to exit.
2) Detailed Program---Press ENTER
“New Program”
will appear.With “New
Program”
selected, press ENTER again.
Timer Programming Window will appear.
Enter the necessary information by following the
instructions described in ‘Timer Recording’ on pages
28-3
1.
3
9
00
10
00
8
End Time
AM
Date
DVR 29:06
Fri
FEB /
AM::
CH
Start Time
3
4
5
PM
ordings Scheduled Recordings
THU FRI SUN MON TUE WED THU FRI
TODAY
SAT
Present day
Tomorrow
Day after tomorrow
Cell
To Change or Cancel the
Program
1
Repeat steps 1-2 above.
2
Press ENTER to call up the menu window.
ProgProgram Changeam Change
Timer ProgTimer Programam
NeNew Progw Programam
Playback and Edit with
Programmed Recordings
1
Press PROGRAM RECORDINGS.
The Programmed Recordings Screen will appear.
2
Using / / / ,select the recorded program.
The recorded program plays back in the preview
window.
3
Press ENTER to call up the menu window.
4
Using / ,select “Play From Start”.
Press
ENTER.
The recorded program is played back.
If you want to resume playback from the last
viewed point:
Select “Resume Play”.
Refer to ‘Resume Playback’ on page 37.
To display a Title List:
Select “Previous Recordings”.
Refer to ‘Playback from the Title List’ on page 37.
PlaPlay Fy From Starrom Start
Resume PlaResume Play
PrePrevious Recordingsvious Recordings
3
To change the program
Using / , select “Program Change”, then
press
ENTER.
Timer Programming Window will appear.
Correct the information, then press
ENTER.
To cancel the program
Using / , select “Timer Program”, then
press
ENTER.
Timer Programming List will appear.
Press
CLEAR .
Confirmation window will appear. Select “Ye s”,
using / and press
ENTER.
To program a new Timer Recording
Using / , select “New Program”, then
press
ENTER.
4
Press TIMER PROG. to exit.
EN
Connections
DVR
DVD
Others
Before You Start
33
E41A1CD(26-35).qx3 06.3.2 11:24 AM Page 33