Filter
Top Products
9
7 For H.323 gatekeeper usage, select Enabled
8 For H.323 gatekeeper address enter the local IP loopback address 127.0.0.1
9 For Gatekeeper registration type, select Gateway
If the IP VCR is configured to register prefixes Codian recommend registering the IP VCR as a Gateway.
The “Which gatekeepers have been tested for the IP VCR?” FAQ in the Technical Support section of the
Codian web site details any exceptions to this advice.
9 Enter a name for your IP VCR in the H.323 ID to register text box
H.323 endpoints that are registered with the gatekeeper can Users can call the VCR using the ID given
here.
10 Enter 71 in the Point to point incoming prefix text box
This Point to point incoming prefix will be used later on in the tutorial.
11 Click Apply changes to register the IP VCR with the internal gatekeeper
Your H.323 endpoints should also be registered with the gatekeeper on the IP VCR. Your endpoint
documentation should describe how to register the endpoint with the gatekeeper.