TANDBERG MSE 8220 VCR User Manual


 
2 Click Call out and record
3 Type in a name for the recording – for example training recording 2
4 Type in the IP address or hostname of the endpoint that you want to record from
5 Select whether to connect to this endpoint using H.323 or SIP
6 Leave all other values as their default settings
Later in the tutorial you will be shown how to pre-configure H.323 endpoints. This allows recordings to
be started quickly using preconfigured settings.
7 Click Call endpoint
8 If the endpoint is not configured to automatically answer calls, accept the call on the endpoint
When the endpoint answers the call the IP VCR starts recording and will continue recording until the call
is disconnected. The recording captures the video and audio streams being sent by the endpoint to the IP
VCR.
11