Filter
Top Products
Recording computer displays
The IP VCR can be used to record and play back an additional video stream known as the content channel. This
can be used to:
f Record H.239 video streams from H.323 endpoints, in either single-endpoint or point-to-point
recordings
f Play back a recorded content channel to H.323 endpoints via H.239
f Stream the content channel to a web page
To do this your IP VCR must be configured to use H.239.
Configuring the IP VCR to use H.239
1 Go to Settings > H.239
2 If necessary change the H.239 status to Enabled
You can only make new recordings using H.239, and play back the content channel recording when the
H.239 Status is set to Enabled.
3 Click Apply changes
31