Filter
Top Products
5 Go to Recordings
In the list of recordings you see a recording called Recording_<DATE>_<TIME> where the DATE and
TIME are the time that the call was answered. The status column will show Recording.
6 Hang up the call from one of the endpoints
The IP VCR disconnects the other endpoint for you, stops recording and the stores the recording
automatically.
7 Refresh the Recordings list. The list will show that the recording has stopped
Recording a conference when the IP VCR calls out
You can record a conference being hosted on a Codian MCU by adding the IP VCR to the conference or by
calling the conference from the IP VCR.
Following on from the previous sections, the IP VCR will call out to a conference that has been configured on
the MCU with a conference ID of 123 registered to the gatekeeper. See the MCU tutorial for instructions on
how to do this.
1 Go to Recordings and click Call out and record
2 Type in a name for the recording, e.g. Record 123
3 Select whether to connect to the MCU using H.323 or SIP
4 For Host name or IP address, type in the conference ID 123
16