TechniSat DigiCorder S1 Satellite TV System User Manual


 
When the scan is completed
When the scan has been completed, the number of transpon-
ders found, the number of programmes as well as the number
of new programmes found will be displayed. In addition, you
will be prompted (Fig. 5-14) to decide whether you want to
automatically include the programmes found in the TV or
Radio lists. If you decide to include the programmes automati-
cally, you can then decide whether they should be included in
the Favourites list in sorted or unsorted form.
If the programmes found are accepted in sorted form,these
are sorted into the Favourites list in accordance with a pre-
programmed system. This means that the order in which the
programmes are included is primarily based on the audio
language, as selected in the installation step Audio language.
If German has been selected as the audio language, the
sorting order can be further differentiated in terms of the cou-
ntry seleced in the installation step Country (Germany, Austria
or Switzerland).
If the new programmes are accepted in unsorted form, then
the newly found programmes are simply added in unsorted
order at the end of the Favourites list.
> Use the right/left arrow to select the type of sorting
you prefer, and confirm by pressing OK.
Exiting from the installation assistant
> The installation assistant will display a final message
(Fig. 5-15) Confirm this by pressing OK, to return to
normal operation.
6 Settings
You have now connected your digital receiver, and commen-
ced operating it. You can, if you wish, still optimize the set-
tings of the digital receiver in accordance with your preferen-
ces.
6.1 Operating language
This menu item allows you to set the menu language in
accordance with your preferences.
To change the operating language, proceed as follows:
> Press the Menu key to display the Main Menu.
(Fig. 6-1)
> Now use the up/down arrow keys to mark the menu
line Operating language.
> Confirm by pressing OK.
The sub-menu Operating language will be displayed.
> Use the up/down arrow keys to mark the preferred
language.
> Press OK to store this selection in memory.
> Press Back to return to the Main Menu.
16
(Fig. 6-1)
(Fig. 5-15)
(Fig. 5-14)
(Fig. 5-13)
Bed_Anl_Digicorder_englisch 18.03.2004 14:10 Uhr Seite 16