Filter
Top Products
> Press OK to select On.
> In the line Update time use the numeric keys to set
the time at which the automatic download of SFI data
is to be carried out.
>To start the download of updated SFI data manually,
press the red function key Start now.
If you do not wish to reeceive the additional data, or if you
cannot receive it because of your location, you can switch off
the data receiving function:
> Switch the item SFI update to off, to disable the data
reception. Only the programme information provided
by the programme providers themselves will now be
available.
If the parameters of the data channel for downloading of the
SFI data should be altered, you can correct them in this
menu. The current transponder data can be obtained from
specialist retailers.In the normal course of events you would
not make any changes to this menu.
8.3 Parental control
Your unit is equipped with an access control function. This
allows you to block key functions (e.g. calling up the main
menu) from unauthorized access. In addition, programmes
and recordings that you have blocked can only be accessed
by means of a four-digit PIN code (unit PIN).
To configure the menu Parental control proceed as follows:
> Press Menu to display the Main Menu.
> Use the up/down arrow keys to mark the line
Settings.
> Confirm by pressing OK.
The sub-menu Settings will be displayed.
> Use the up/down arrow keys to mark the line
Parental control.
> Confirm by pressing OK.
The menu Parental control will be displayed.
(Fig. 8-10)
> Use the up/down arrow keys to move the marker
around within the menu, and change the individual
positions. When selecting a menu item please note
any additional messages displayed on screen.
8.3.1 Changing the unit PIN
The unit PIN code is set at the factory to 0000.
> Press OK to display the menu used to change the unit
PIN code. (Fig. 8-11)
> Now use the numeric keys to enter the current unit
PIN code (Default setting 0000).
> Using the numeric keys, enter the desired new unit
PIN code.
49
(Fig. 8-10)
(Fig. 8-11)
Bed_Anl_Digicorder_englisch 18.03.2004 14:10 Uhr Seite 49