TechniSat DigiCorder S1 Satellite TV System User Manual


 
focus procedure.
While the automatic adjustment is in progress, the
message Autofocus will be displayed. (Fig. 9-13)
9.3.3 Saving a satellite position
NWhen the Autofocus function has been completed, you can
proceed to save the satellite position in memory.
> Use the arrow keys to mark the field Save.
> Press OK.
Now the test transponder selected will check whether
a signal is being received at this position. At the same
time, the system will check whether the position to be
saved is one that is already included in the pre-pro-
gramming. (Fig. 9-14)
If this is the case, the message will be displayed:
Orbital position xx found. Save satellite ?
(Fig. 9-15)
>To save the satellite position in memory, use the
left/right arrow keys to mark the field Yes, and
confirm by pressing OK.
If the check carried out by the test transponder does
not recognise a position as being included in the pre-
programming, or if the signal is too weak, an appropri-
ate message will be displayed on screen.
(Figs. 9-16 and 9-17)
>To save the satellite position in memory, use the
left/right arrow keys to mark the field Yes, and
confirm by pressing OK.
9.4 Current satellite list
The satellite positions that have been saved in memory can
be found in the satellite list. Positions that have not yet been
saved are indicated in the list by an “*”.
>To turn the antenna dish to a position in the satellite
list, use the arrow keys to mark the field Current
satellite list.
> Confirm by pressing OK.
> Use the up/down arrow keys to select the desired
position.
> Confirm by pressing OK.
The dish will now be turned to the selected position.
While the positioning procedure is in progress, the
blinking message “turn” will be displayed in the menu.
9.4.1 Selecting a satellite position
In order to turn the dish antenna to the position specified in
the satellite list, your digital receiveris equipped with the fun-
ction turn to Sat.
62
(Fig. 9-16)
(Fig. 9-17)
(Fig. 9-14)
(Fig. 9-15)
(Fig. 9-13)
Bed_Anl_Digicorder_englisch 18.03.2004 14:10 Uhr Seite 62