TechniSat DigiCorder S1 Satellite TV System User Manual


 
times available (Fig. 7-9)
> Use the up/down arrow keys to select the preferred
starting time.
> Confirm by pressing OK.
Provided the movie has been authorised for the selec-
ted starting time, you can enjoy the programme at the
desired time.
7.4 Volume control
You have the option of adjusting the volume of your digital
receiver. This makes using your receiver even more conve-
nient, since all important functions are combined on the recei-
ver remote control, and you will only rarely need to use the
remote control of your television set. When you switch on the
digital receiver, the volume will be set to the level last selec-
ted.
> Adjust the volume of your receiver by using the keys
Volume + to increase the volume and Volume - to
reduce the volume.
> Press the key Sound on/off to switch off the sound
(mute), press the same key again to switch the sound
on again.
7.5 Selecting another language
Where a programme is broadcast in several languages, or
with several sound channels, this will be indicated on screen
(Fig. 7-10). You can then proceed as follows to select another
language or another sound channel:
> Press the key Language select. A list of the langua-
ges currently being broadcast will be displayed on
screen (Fig. 7-11).
> Use the up/down arrow keys to select the preferred
language, and confirm by pressing OK.
You can now listen to the programme in the desired langua-
ge. Your digital receiver is also equipped to receive mono bro-
adcasts.
> Use the left/right arrow keys to select from Mono
channel 1 ( ), Mono channel 2 ( ) and Stereo
().
7.5.1 Dolby Digital (AC3 mode)
Where a programme is broadcast in Dolby Digital sound, this
will be indicated by the Dolby logo in the information box
when you switch to the appropriate programme. If the function
Dolby Digital (AC3) has been activated in accordance with
Point 6.3.6, the programme will automatically be presented in
this format.
If you have not activated the function Dolby Digital (AC3),
you can set the unit to AC3 mode manually as follows:
26
(Fig. 7-11)
(Fig. 7-10)
(Fig. 7-9)
Bed_Anl_Digicorder_englisch 18.03.2004 14:10 Uhr Seite 26