symbols per second).
> Use the up/down arrow keys to mark the line
Symbol rate.
> Use the numeric keys to enter the appropriate sym-
bol rate.
Polarisation
> Use the up/down arrow keys to mark the line
Polarisation.
> In this line, use the OK key to enter the polarisation
plane (horizontal or vertical) on which the desired
programme is broadcast.
Scan mode
> Use the up/down arrow keys to mark the line Scan
mode.
> Use the OK key to decide whether you wish to scan
only for free-to-air programmes (Free programmes)
or whether you wish to include encrypted programmes
(All programmes).
> Confirm by pressing the red function key Start scan.
The scan will be started. Please note all messages
displayed on screen.
>You can terminate the scan by pressing the red func-
tion key again.
8.4.4 Manual scan
Should a programme not be found by an automatic scan or a
transponder scan, it may be necessary to enter additional,
programme-specific PID numbers for this programme. It may
be necessary to look up these numbers on the Internet, or to
obtain them directly from the appropriate programme provi-
der.
The menu (Fig. 8-18) differs from the menu Transponder
scan only with regard to the menu items PCR-PID, Audio-
PID and Video-PID. There is no need to enter the scan
mode.
> Proceed as described for a transponder scan.
> Then, using the up/down arrow keys, mark the lines
PCR-PID, Audio-PID and Video-PID, and use the
numeric keys to enter the appropriate numbers.
8.4.5 After the scan
While the scan is in progress, you can follow this on screen
as the various transponders are scanned. When the scan has
been completed, the number of transponders found, the num-
ber of programmes found as well as the number of new pro-
grammes found will be shown on screen. In addition, a
prompt will appear (Fig. 8-19), asking whether you wish to
include the programmes found automatically in the TV or
Radio list. If you want to include the programmes automati-
53
(Fig. 8-19)
(Fig. 8-18)
Bed_Anl_Digicorder_englisch 18.03.2004 14:10 Uhr Seite 53