Filter
Top Products
> Use the up/down arrow keys to mark the satellite
required.
Use the up/down arrow keys to move the marker up
or down one line at a time. Use the left/right arrow
keys to move forward or back one page at a time.
If the satellite you are looking for is not shown in the
list, please select one of the reserve slots, marked
User 1 to User 14.
> Confirm by pressing OK. The selected satellite will
now be inserted at the previously selected position in
the menu Antenna settings.
Continue to work in the menu Antenna settings in this man-
ner until the settings in this menu correspond fully with those
of your reception installation. Select the option No Satellite
for any switching criteria not required.
6.4.3 Additional settings/LNC characteristics
When you have completed adjsuting the switching matrix of
your DVB receiver to match the reception installation, you
should check the additional settings for your reception instal-
lation, and adjust them where necessary.
> Use the left/right arrow keys to move the marker to
the column Configuration.
> Now use the up/down arrow keys in the line in which
you want to check or adjust the settings, and press
Next.
> Confirm by pressing OK.
A sub-menu will be displayed in which you can adjust
LNC settings, and set up a test transponder.
(Fig. 6-9)
The following adjustments may be made:
LNC type
> In this line use the left/right arrow keys to enter the
type of LNC you are using. You can choose from
Single LNC, Quatro LNC, DisiCon 1 LNC, DisiCon
2 LNC, DisiCon 4 LNC, C-Band LNC and a User
LNC for manual entry of LNC data.
> Press OK to accept the setting into memory.
Test Transponder
The following points of this menu need only be entered if you
wish to check the satellite signal of a particular satellite.
Transponder frequency
In this line, use the numeric keys to enter a frequency on
which digital programmes are broadcast.
Polarisation
Use the up/down arrow keys to select the appropriate polari-
sation plane (horizontal or vertical).
21
(Fig. 6-9)
A B
PPoossiittiioonn
Output
A B
PPoossiittiioonn
Output
A B
OOppttiioonn
Output
Example:
Bed_Anl_Digicorder_englisch 18.03.2004 14:10 Uhr Seite 21