TechniSat DigiCorder S1 Satellite TV System User Manual


 
> Press OK. The active programme list will be displayed.
> Now use the red function key Category to open a win-
dow displaying the programme list types (Favourites
list, Providers list and Total list). The active type of
programme list will be highlighted. (Fig. 7-2)
In addition, the entry Hard drive recordings will be
shown, allowing you to access the hard drive navigator
(Point 7.15.2).
> Use the up/down arrow keys to select a programme
list type, e.g. Total list.
> Confirm by pressing OK.
The alphabetically sorted total list will be displayed,
containing all programmes. (Fig. 7-3)
> Use the up/down arrow keys to select the program-
me you wish to view or listen to.
> Confirm by pressing OK.
or
> Press the green function key PVR to go directly to the
hard drive navigator.
7.2.4 Accessing blocked programmes
If a programme is selected that is blocked by the parental
control function, the message Unit PIN will be displayed on
screen. (Fig. 7-4)
> Use the numeric keys to enter your PIN code. The
selected programme can now be viewed.
or
> Switch to a programme whose access is not blocked.
If you have selected the option on under Point 8.3.2, you will
always be prompted to enter the PIN code when switching to
a blocked programme. However, in order to make matters
more convenient for you, you need enter the PIN code only
once in each operating phase.
7.2.5 Information box
Each time you switch programmes, an information box (Fig.
7-5) will be displayed briefly, showing the programme number
and name of the selected programme. In addition, some pro-
gramme characteristics will be indicated, for example for
teletext, for a 16/9 broadcast, for sub-titles, for
encrypted programmes. Also, where provided, the EPG cate-
gory and the FSK age restriction in Germany (Freiwillige
Selbstkontrolle der Filmwirtschaft) will be indicated.
7.3 Reception of encrypted programmes
Your receiver is equipped with a “Common Interface”. This
enables you to receive encrypted programmes. To do this,
you must first insert a CI module together with a valid smart
card into the slot provided:
24
(Fig. 7-3)
(Fig. 7-4)
(Fig. 7-5)
(Fig. 7-2)
Bed_Anl_Digicorder_englisch 18.03.2004 14:10 Uhr Seite 24