Filter
Top Products
6.2 Basic settings
To gain optimum enjoyment from your DVB receiver, you
should still make some settings related to your individual pre-
ferences.
> Press the Menu key to call up the Main Menu.
> Use the up/down arrow keys to mark the entry
Settings.
> Confirm by pressing OK. The sub-menu Settings will
be displayed. (Fig. 6-2)
> Now use the up/down arrow keys to mark the entry
Basic Settings.
> Confrim by pressing OK. The menu Basic Settings will
be displayed. (Fig. 6-3)
> Use the up/down arrow keys to move the marker
around within the menu, and to change any of the
individual positions. When selecting a menu item, ple-
ase note any additional messages displayed on
screen.
The following settings may be made:
6.2.1 Time difference GMT (hours)
Your unit is equipped with a clock. This is synchronized via
satellite with Greenwich Mean Time.
If you have selected the entry None under the heading
Country (Point 6.2.3), you can simply set the unit clock to the
correct local time by means of the right/left arrow keys. For
Germany, this difference is +1 hour on standard time, and +2
hours during daylight savings time.
6.2.2 Country
This function provides for an automatic switch-over from
standard to daylight savings time.
> Go to the entry Country and use the left/right arrow
keys to select you country of residence.
6.2.3 Remote control code
In this line you must decide whether your receiver should be
allocated the remote control option SAT1 or SAT2.
>To make the selection, press the SAT1 resp. SAT2
key and the OK key simultaneously.
Press the Back key to return to the menu Settings, or
press Menu to return to normal operation. The settings
will be automatically stored in memory.
6.2.4 Standby clock
In this line you must decide whether the clock time should be
displayed when the unit is in standby mode.
> In this line, you can use the left/right arrow keys to
set the standby clock mode to on or off.
17
(Fig. 6-2)
(Fig. 6-3)
Bed_Anl_Digicorder_englisch 18.03.2004 14:10 Uhr Seite 17