TechniSat DigiCorder S1 Satellite TV System User Manual


 
> Repeat the code entry.
> When you have completed changing the unit PIN code
in this manner you will automatically be taken back to
the Parental Control menu.
Note!
Do not forget your unit PIN code. If you should forget
it, please consult your specialist retailer!
8.3.2 Mode
> In this line, use the left/right arrow keys to select
parental control on or off.
8.3.3 Selecting a programme
> Press OK. The Favourites list of the current mode (TV
or Radio) will be displayed. The currently selected pro-
gramme is marked. (Fig. 8-12)
> Press the green function key to switch between the
TV and Radio lists.
> Press the red function key to open a selection win-
dow. Here you have the choice of selecting the desired
programme list type.
> Use the up/down arrow keys to select the desired
programme type (e.g. Favourites list).
> Confirm by pressing OK. The programme list selected
will be displayed.
> Now use the arrow keys to mark the programme to
which you wish to block the access.
> Block the programme by pressing the yellow function
key. The parental control symbol will appear next
to the programme selected.
>To block several programmes simultaneously, mark
these as described in Point 8.1.2 (Marking blocks of
programmes) and block them by pressing the yellow
function key.
> When you have completed configuring the programme
list according to your preferences, press the Menu key
to revert to normal operation.
>To reverse the blockage of individual programmes,
proceed as described above. Mark the appropriate
programme, and remove the parental lock symbol by
pressing the yellow function key.
50
(Fig. 8-12)
Bed_Anl_Digicorder_englisch 18.03.2004 14:10 Uhr Seite 50