Filter
Top Products
102
Using the TV’s Advanced Features
Setting up the Network
Easy Setup using PBC (Push button configuration)
1 Press the MENU button.
2 Select Network > Network Setup > Wireless Setup and press
the OK button.
3 Press ▲/▼ (arrow) buttons to select Easy Setup and press the
OK button.
4 Press ▲/▼ (arrow) buttons to select PBC and then press the
OK button.
5 Press ▼ (arrow) button to select Start Scan, and then press the
OK button.
6 Following the on-screen instructions, push the appropriate
button on your AP.
7 When a screen reporting that “Wireless conguration is
complete” appears, press the EXIT button.
To cancel searching for the AP:
v Press the BACK button while searching for the AP. A message
appears. Press ◄/► (arrow) buttons to select Yes, and then
press the OK button.
Easy Setup using PIN (Personal Identification Number)
1 Press the MENU button.
2 Select Network > Network Setup > Wireless Setup and press
the OK button.
3 Press ▲/▼ (arrow) buttons to select Easy Setup and press the
OK button.
4 Press ▲/▼ (arrow) buttons to select PIN.
5 Press ▼ (arrow) button to select Start Scan, and then press the
OK button.
6 Enter the PIN displayed on this screen into your computer or
AP.
7 Press ▲/▼ (arrow) buttons to select the desired AP, and then
press the OK button.
Check the MAC address on the label or in the manual of the AP and select
an AP.
8 When a screen reporting that “Wireless conguration is
complete” appears, press the EXIT button.