Filter
Top Products
27
Connecting Your TV
Connecting a VCR, antenna, cable TV, or camcorder
Items needed:
v Coaxial cables
v Standard AV cables
If you have a mono VCR, connect L/MONO on the TV to your
VCR’s audio out terminal using the white audio cable only.
v Standard audio cable
The menu setting may need to be changed in order to watch the shared
input between composite and component video. Composite and
component video cannot be used simultaneously.
When you use a cable box, you may not be able to use the remote control
to program or access certain features on the TV. When you use
ColorStream
TM
HD or Video, switch AV input mode appropriately.
See “Setting the AV input mode” on page 52.
To view the antenna or cable signal:
Select ANT/CABLE video input source on the TV.*
To view basic and premium cable channels:
Turn off the VCR. Select the ANT/CABLE video input source on
the TV.* Tune the TV to channel 3 or 4 (whichever channel the
cable box output is set to). Use the cable box controls to change
channels.
To view the VCR or camcorder video:
Turn on the VCR or camcorder video. Select VIDEO input source
on the TV.*
*To select the video input source, press the INPUT button on the
remote control, see “Selecting the video input source” on page 54.
The unauthorized recording, use, distribution, or revision of television
programs, videotapes, DVDs, and other materials is prohibited under the
Copyright Laws of the United States and other countries, and may subject
you to civil and criminal liability.