Filter
Top Products
51
Setting up your TV
Setting channel skip
Manual Tuning
After storing channels in memory, you can manually enter channels
if the physical channel is known.
1 Press the MENU button and open the Installation menu.
2 Highlight Channel Tuning and then press the OK button.
3 Highlight Manual Tuning and then press the OK button, the
Manual Tuning form will appear.
4 Use buttons 0–9 on the remote control to enter the channel
number (for example, 56)
5 Press the OK button to start Manual Tuning.
Type: Description:
ATV Analog channel.
DTV Digital channel.
Setting channel skip
To prevent a channel from being viewed, you can set it to be
skipped.
1 From the Options menu, highlight Channel Options, and then
press the OK button.
The list of channels appears.
(Sample Illustration) Channel Options
2
Press the ▲
/▼(arrow)
buttons to select a channel position to be
skipped, and then press the OK button .
A check will appear in the box. To remove the check, press the
OK button again.
Manual Tuning