Filter
Top Products
74
Setting up your TV
Selecting the PIN code
StableSound
TM
cannot be used at the same time as DTS TruSurround
TM
.
The feature is greyed out until DTS TruSurround
TM
is turned Off.
Using the Dolby
®
Digital Dynamic Range Control feature
You can further compress Dolby
®
Digital dynamic range, allowing
you to switch from digital to analog broadcasts at the same dynamic
range.
To use the Dolby
®
Digital Dynamic Range Control:
1 Press the MENU button and open the Sound menu.
2 Highlight Dynamic Range Control, and then press the OK button.
3 Press the ▲/▼(arrow) buttons to select On, and then press the OK
button.
v This feature is available when the TV is tuned to a digital RF channel
or an HDMI
®
input with the Dolby
®
Digital signal.
Selecting the PIN code
A PIN code is necessary for some menus.
v The Parental Control and Locks menu is grayed out if no PIN has
been set.
Enter a new PIN code
1 Press the MENU button and open the Options menu.
2 Highlight Parental PIN Setup, and then press the OK button.
3 Use the number buttons to enter a 4-digit number. Conrm the code.
Forgotten PIN code
While the PIN code entering screen is displayed, press the INFO
button four times within ve seconds. The PIN code will be cleared
and you can enter a new PIN code.
Changing or deleting your PIN code
1 Press the MENU button and open the Options menu.
2 Highlight Parental PIN Setup, and then press the OK button.
3 Use the number button to enter a 4-digit number.
4 Select Change PIN or Delete PIN. Press the OK button.