Filter
Top Products
58
Setting up your TV
Tuning to the next programmed channel
To tune to the next programmed channel, press the CH ▲/▼
(arrow) buttons on the remote control or TV control panel.
This feature will not function until you have programmed channels into
the TV’s channel memory, see “Storing channels in memory (optional)”
on page 49.
Tuning to a specific channel (programmed or unprogrammed)
To tune analog channels:
Press the Channel Number (0–9) on the remote control. For
example, to select channel 125, press 1, 2, 5, and then press the
OK button.
Tuning digital channels:
Press the Channel Number (0–9) on the remote control, followed by
the (Dash 100) button, and then the sub-channel number. For
example, to select digital channel 125-1, press 1, 2, 5, –, 1, and then
press the OK button.
If a digital channel is not programmed, either through the automatic
channel scan or the Channel add function, see “Auto Tuning” on page 49,
you will have to tune the RF channel using the Channel Numbers and the
(Dash 100) button on the remote control.
Switching between two channels using Channel Return
The Channel Return feature allows you to switch between two
channels without entering an actual channel number each time.
1 Select the rst channel you want to view.
2 Select a second channel using the Channel Number buttons
(and the (Dash 100) button if selecting a digital channel).
3 Press the CH RTN button on the remote control. The previous
channel will display. Each time you press the CH RTN button,
the TV will switch back and forth between the last two channels
that were tuned.
Tuning to the next programmed channel