Filter
Top Products
122
Troubleshooting
MediaShare problems
Wireless network problems
Check that the router/AP (Access point) power is On.
After starting wireless network setup, conrm that the network is
congured properly by performing the network connection test, see
“Network Connection Test” on page 108.
Check the router/AP’s connection status.
If the router/AP does not support PBC or WPS, Easy Setup (PBC)
will not work even if the push-button is pressed, see “Wireless
Setup” on page 101.
If the available router/AP list is not displayed in Easy Setup (PBC)
or Assisted Setup, the power of the router/AP may be Off. Check
that it is On, and then try restarting the scan for available routers/
APs, see “Easy Setup using PBC (Push button conguration)” on
page 102.
Refer to the router/AP’s instruction manual.
MediaShare problems
Incorrect functionality may occur when using a USB HUB
connection.
Photo les that were processed and edited using the computer’s
application software may not be viewable.
The TV may select one format automatically and play it when
contents that support two or more formats are played.
Conrm that the contents of the USB storage device are in formats
that are supported by this TV, see “MediaShare (Videos, Music, and
Photos)” on page 78.
Copyright protected content stored on the media server may not be
playable on the TV.
Content playback stability may be affected by heavy network
trafc.
Content originally recorded on a computer may not play correctly.
Set the media sharing of the media server to the correct settings,
according to the media server instruction manual.
Depending on the media server, access may be limited by the MAC
address. Set the server according to the media server’s instruction
manual.
This TV’s MAC Address can be conrmed in the Network Setup
portion of the User Menu, see “MAC Address” on page 108.
Wireless network problems