Filter
Top Products
107
Using the TV’s Advanced Features
Setting up the Network
7 Press the ◄/►(arrow) buttons to select the IP Address eld
and use the 0-9 buttons to enter in a digit. Press the ► (arrow)
button to select the subsequent elds. To save the setting, press
the OK button.
IP address field numbers must be between 0 and 255.
8 Press the ▲/▼(arrow) buttons to highlight Subnet Mask, edit
in the same way as IP Address.
9 Press the ▲/▼(arrow) buttons to highlight Default Gateway,
and edit in the same way as IP Address.
If you manually set the IP address, you must not use the same IP address
with any other device. The IP address you use should be a private
address.
If you do not know the correct values to use, contact your network
administrator or internet service provider.
DNS Setup
v When the DHCP function of the router connected to this TV is Off, set
Auto Setup to Off, and manually set the DNS address(es).
Your Internet Service Provider should have provided these to you.
v The settings in Auto Setup are linked to those selected in the IP
Address Setup menu. If Auto Setup in the IP Address Setup menu is
set to On, then Auto Setup will also be set to On.
Auto Setup:
1 Press the MENU button.
2 Select Network > Network Setup > Advanced Network
Setup and press the OK button.
3 Press the ▲/▼ (arrow) buttons to select DNS Setup and then
press the OK button.
4 Press the ▲/▼ (arrow) buttons to select Auto Setup and press
the OK button.
5 Press the ▲/▼ (arrow) button to select On.
Other items are grayed out when Auto Setup is set to On.