Toshiba 58L5400UC CRT Television User Manual


 
72
Setting up your TV
Adjusting the audio
Selecting stereo/SAP broadcasts
The multi-channel TV sound (MTS) feature allows you to output
high-delity stereo sound. MTS also can transmit a second audio
program (SAP) containing a second language, music or other audio
information (when provided by individual stations).
When the TV receives a stereo or SAP broadcast, the icon Stereo or
SAP appears when the INFO button is pressed. The MTS feature is
only available for analog signals on the ANT/CABLE input.
To listen in stereo sound:
1 Press the MENU button and open the Sound menu.
2 Highlight MTS, and then press the OK button.
3 Select Stereo, and then press the OK button.
v You can typically leave the TV in Stereo mode because it outputs the
type of sound being broadcast (stereo or monaural).
v If the sound is noisy, select Mono to reduce the noise.
To listen to an alternate language on an ATSC digital station (if
available), highlight the Primary Audio Language eld in step 2
above, and then select the language you prefer.
To listen to a second audio program on an analog station, if available,
select SAP in step 2 above.
v A second audio program (SAP) can be heard only on those TV
stations that offer it. For example, a station might broadcast another
language as a second audio program. If you have SAP on, you will
see the current program on the screen but hear the other language
instead of the program’s normal audio.
v If you have SAP on and the station you are watching is not
broadcasting a second audio program, the station’s normal audio will
be output. However, occasionally there is no sound at all in SAP
mode. If this happens, set the MTS feature to Stereo mode.