UI (User Interface)
3-226 G24-L AT Commands Reference Manual April 15, 2008
The <code> parameter is a two-letter abbreviation of the language. The language codes, as
defined in ISO 639, consist of two characters, e.g. "DE", "EN" etc.
The following table shows the +CLAN parameters.
Example
AT+CLAN?
+CLAN: "EN"
OK
AT+CLAN=?
+CLAN: "DE","EN","IT","FR","ES","NL","SW","DA","PT","FI","NO","EL","TR"
OK
Command
Type Syntax Response/Action Remarks
Set
AT+CLAN=<code> OK
or:
ERROR
Set command sets the
selected language.
Read
AT+CLAN? +CLAN: <code>
The read command displays
the currently selected lan-
guage.
Test
AT+CLAN=? +CLAN: (list of <code>s)
Test command displays list of
supported language <code>s.
Table 3-149: +CLAN Parameters
<code> Description
DE German
EN English
IT Italian
FR French
ES Spanish
NL Dutch
SW Swedish
DA Danish
PT Portoguese
FI Finnish
NO Norwegian
EL Greek
TR Turkish
