Appendix A: Reference Tables
April 15, 2008 G24-L AT Commands Reference Manual A-13
+MIPSTAT
This unsolicited event is sent to
the terminal indicating a change
in link status.
Page 3-288
+MIPXOFF
This unsolicited event is sent to
the terminal to stop sending data.
Page 3-288
+MIPXON
This unsolicited event is sent to
the terminal when the G24-L has
free memory in the accumulating
buffer.
Page 3-289
+MMAD This command reads and
monitors digital value from a
specified ADC.
Page 3-149
+MMAR
This command changes the status
of an SMS message in the G24-L
memory from "REC UNREAD"
to "REC READ".
Page 3-101
+MMICG
This command handles the
selection of microphone gain
values.
Page 3-172
+MMGL
This command displays a list of
SMS messages stored in the
G24-L memory.
Page 3-89
+MMGR
This command enables the user
to read selected SMS messages
from the G24-L memory.
Page 3-94
+MPCMC
This command defines whether
the PCM clock is generated
continuously or not, when
module is in digital audio mode.
Page 3-153
+MPING
This command will allow
verifying IP connectivity to
another remote machine
(computer) by sending one or
more Internet Control Message
Protocol (ICMP) Echo Request
messages.
Page 3-292
+MPINGSTAT
This is the unsolicited response
that the G24-L sends to the
terminal to inform of ping
execution status update and
provides summary statistics of
ping request when ping request
execution is completed.
Page 3-296
+MRST
This command enables customer
software to perform a hard reset
to the G24-L unit.
Page 3-143
Table A-1: AT Commands (Alphabetical) (Cont.)
AT Command Description Page
