Appendix A: Reference Tables
April 15, 2008 G24-L AT Commands Reference Manual A-21
Character Set Table CS2: (ASCII <-> UTF-8)
The following table shows the conversion between the ASCII and UTF-8 character sets.
Character Set Table CS3: (UCS-2 <-> UTF-8)
The following table shows the conversion between the UCS-2 and UTF-8 character sets.
Note: Conversion from the default GSM alphabet to the above character set is straightforward.
Conversions of the characters listed below the table are not supplied.
Character Set Table CS6: (UCS-2 Full table)
Character Set Table CS6: (UCS-2) is not provided due to its size.
0x77
0x0077 x
0x78
0x0078 y
0x79
0x0079 z
0x7A
0x007A ä
0x7B
0x00E4 ö
0x7C
0x00F6 ñ
0x7D
0x00F1 ü
0x7E
0x00FC à
0x7F
0x00E0
Symbol GSM (GSM 03.38)
ASCII-7bit Byte Encoding UTF-8 Bit Encoding
00 - 7F 0xxxxxxx
UCS2 UTF-8
Byte Encoding Bit Encoding Byte 1 Byte 2 Byte 3
0000 - 007F 000000000xxxxxx
x
0xxxxxxx
0080 - 07FF 00000yyyyyxxxxx
x
110yyyyy 10xxxxxx
0800 - FFFF zzzzyyyyyyxxxxxx 1110zzzz 10yyyyyy 10xxxxxx
