Modem ID
3-4 G24-L AT Commands Reference Manual April 15, 2008
Example
AT+CGSN?
+CGSN: "004400013805666"
OK
AT+GSN
+GSN: "004400013805666"
OK
+CSCS, Select Terminal Character Set
This command selects the G24-L character set. The G24-L supports the following character sets:
GSM, UCS2, UTF8, 8859-1 and ASCII.
The default value, set upon system initialization or when omitting <chest> in set command, is
ASCII.
The following table shows the +CSCS parameter optional values.
Example
AT+CSCS=?
Command
Type
Syntax Response/Action
Set
+CSCS=[<chset>] OK
or:
+CMS ERROR: <err>
Read
AT+CSCS? +CSCS: <selected character set>
Test
AT+CSCS=? +CSCS: (<supported character sets>)
Table 3-2: +CSCS Parameters
<chset> Character Set Input/Output Format
“ASCII” ASCII (0x00 - 0x7F) Quoted string.
(For example, "AB" equals two 8-bit
characters with decimal values 65, 66.)
“GSM” GSM default alphabet
(GSM 03.38 subclause 6.2.1)
HEX representation.
"UCS2" Unicode (ISO/IEC 10646 [32]) HEX representation.
(For example, 00410042 equals two
16-bit characters with decimal values 65,
66.)
"UTF8" 8-bit Unicode (ISO 10646 transformation
format)
HEX representation.
"8859-1" LATIN (ISO 8859-1) Quoted string.
