AT Commands Alphabetical Summary
A-2 G24-L AT Commands Reference Manual April 15, 2008
&G
This command is supported for
backward compatibility only, and
has no effect.
Page 3-304
&J
This command is supported for
backward compatibility only, and
has no effect.
Page 3-304
&K
This command configures the
RTS/CTS flow control.
Page 3-135
&L
This command is supported for
backward compatibility only, and
has no effect.
Page 3-304
&M
This command is supported for
backward compatibility only, and
has no effect.
Page 3-304
&P
This command is supported for
backward compatibility only, and
has no effect.
Page 3-304
&Q
This command selects the
asynchronous mode, and has no
effect.
Page 3-33
&R
This command is supported for
backward compatibility only, and
has no effect.
Page 3-304
&S
This command is supported for
backward compatibility only, and
has no effect.
Page 3-304
&T
This command is supported for
backward compatibility only, and
has no effect.
Page 3-304
&V This command displays the
current active configuration and
stored user profiles.
Page 3-221
&W This command stores the user
profile.
Page 3-222
&Y This command displays the
default user profile.
Page 3-224
?
This command displays the most
recently updated value stored in
the S-register.
Page 3-198
\A
This command is supported for
backward compatibility only, and
has no effect.
Page 3-304
\B
This command is supported for
backward compatibility only, and
has no effect.
Page 3-304
Table A-1: AT Commands (Alphabetical) (Cont.)
AT Command Description Page
