GPRS
3-296 G24-L AT Commands Reference Manual April 15, 2008
Example
AT+MIPCALL=1,"internet"
OK
+MIPCALL: 10.170.4.111
AT+MPING=1,"10.170.4.112" // Ping remote computer using default parameters
OK
+MPING: "10.170.4.112",0,0,400 //Echo Reply message received, RTT is 400 ms.
+MPING: "10.170.4.112",0,0,420
+MPING: "10.170.4.112",0,0,440
+MPING: "10.170.4.112",0,0,410
//Ping request execution is completed. Four Echo Request
messages were sent, and four //Echo Reply messages
were received. Average RTT is 417 milliseconds.
+MPINGSTAT: 0,"10.170.4.112",4,4,417
+MPINGSTAT, Status Update for +MPING Execution
This is the unsolicited response that the G24-L sends to the terminal to inform of ping execution
status update and provides summary statistics of ping request when ping request execution is
completed.
Command Type Syntax Response/Action Remarks
Unsolicited
Response
+MPINGSTAT:
<status>[,<"Destination
IP">,<SentMessages>,
<ReceivedMessages>[,<AverageRTT>]]
The receipt of
corresponding ICMP
Echo Reply messages
will be displayed
within unsolicited
responses, along with
round trip times.
