Appendix A: Reference Tables
April 15, 2008 G24-L AT Commands Reference Manual A-11
+MAVOL
This command enables you to
determine a volume setting for a
particular feature in a particular
accessory.
Page 3-166
+MBC
This command controls the
battery charger process.
Page 3-130
+MCSAT
This command
enables/disables/exercises SMS
alert tone for an arriving SMS.
Page 3-111
+MCSN
This command sets EFmsisdn in
the SIM.
Page 3-69
+MCST
This command displays the
current state of the call
processing, and also
enables/disables the unsolicited
indication of any change in the
call processing state.
Page 3-42
+MCWAKE
This command requests reports
on the status of the GPRS/GSM
coverage.
Page 3-139
+MDC
This command enables you to
select the desired messages to be
displayed upon connection of a
voice call with a remote party.
Page 3-36
+MDSI
This command enables
unsolicited reporting of
indications of SIM deactivation
and invalidation.
Page 3-67
+MFS
This command is used to
determine how long the G24-L
waits before attempting to
re-register after a registration
attempt has failed and the G24-L
is not registered.
Page 3-126
+MGEER
This command returns the PDP
context activation reject cause.
Page 3-240
+MGGIND
This command configures the
service indicator on pin 49 of the
70 pin connector to be GPRS or
GSM.
Page 3-140
+MIOC
This command defines the
G24-L 8 GPIO pins data
value.
Page 3-144
+MIOD
This command defines the
G24-L 8 GPIO pins
configuration.
Page 3-147
Table A-1: AT Commands (Alphabetical) (Cont.)
AT Command Description Page
