Filter
Top Products
20
4.2.3 Alarm / Motion Recording
Take the following steps to activate the programmed alarm recording. For
ALM OPERATION,
REC RATE, REC QUALITY, AUDIO, ALM TYPE, ALM DURATION, and PRE-ALARM settings,
please refer to section 5.2 for more details.
(1) Press the
Setup button to enter the MAIN MENU.
(2) Select
ALARM/ MOTION and press the Enter button to enter the ALARM/ MOTION
SETTING
.
(3) Set the desired
REC RATE, REC QUALITY, ALM TYPE, and ALM DURATION for use. If
audio is required, set
AUDIO to ON. If pre-alarm recording is required, set PRE-ALARM to
ON.
(4) To activate the alarm recording, set
ALM OPERATION to ON. To deactivate it, set ALM
OPERATION
to OFF.
(5) To active the motion alarm recording, Select MOTION SETTING and press the Enter button
to enter the MOTION SETTING PAGE, set CH1/ CH2/ CH3/ CH4 TO ON, and set a suitable
sensitivity according to the video sources. 1 is the Highest sensitivity, 5 is the lowest.
MAIN MENU
RECORD
ALARM
TIMER/ SEQ/ TITLE
COMMUNICATION
DISK
SYSTEM
GOTO ALARM/ MOTION PAGE
ALARM / MOTION
ALM OPERATION : ON
REC RATE : 10F/S
REC QUALITY : BEST
AUDIO : OFF
ALM TYPE : NO
ALM DURATION : 0 SEC
PRE- ALARM : OFF
MOTION SETTING
MAIN PAGE
ALARM REC ENABLE
ALARM / MOTION
ALM OPERATION : ON
REC RATE : 20F/S
REC QUALITY : BEST
AUDIO : OFF
ALM TYPE : NO
ALM DURATION : 0 SEC
PRE- ALARM : OFF
MOTION SETTING
MAIN PAGE
ALARM REC ENABLE
MOTION SETTING
CH1 : ON
CH2 : OFF
CH3 : OFF
CH4 : OFF
SENSITIVITY : 3
MAIN PAGE
SET MOTION DETECTION