Filter
Top Products
22
4.3 Playback Operations
This section outlines the controls and options available during playback of recorded video. When
playing a file, the monitor should display a flashing
PLAY message and the PLAY button will light
up indicating that the DVR is in the playback status.
To switch between channel 1..4 and quad view in the playback mode, please press
CH1 CH 2
CH 3 CH4 and buttons. Besides switching between channels, CH1 CH 2
CH 3 CH4 can also be used to zoom the picture as 2X2 full screen view.
Operation Status
A. From REC mode to Playback mode
(In live mode, directly press the PLAY button to play a latest recorded video)
REC→〔STOP〕→〔PLAY〕……………………………… Play the latest recorded file
〔Play to the end of the file〕…Show the ending message (use search functions
or rewind to replay the file if required)
〔STOP〕→〔PLAY〕…………Play the file from the stop position
B. Search to play back a particular recorded video
Search→〔PLAY〕
………………………………………… Play a selected file
〔Play to the end of the file〕…………Show the ending message (Search again or rewind
to replay the file if required)
〔STOP〕→〔PLAY〕…………………Play the file from the stop position
C. Play Back From The Oldest Data
〔Stop: Press the “STOP” button for three seconds〕→〔PLAY〕..play back from the beginning of the
HDD recorded data
4.3.1 Fast Forward/Reverse
There are 7 speeds available for playback: 1x, 2x, 4x, 8x, 16x, 30x and 100x
While playing back recorded video at recorded speed:
Forward: Turn the Shuttle dial to the right to view the recorded video in the forward direction at a
speed faster than the recorded speed. Each subsequent turn of the shuttle to the right
increases the forward rate, as 2x, 4x, 8x, 16x, 30x and 100x.
Reverse: Turn the Shuttle dial to the left to view the recorded video in the reverse direction at a
speed faster than the recorded speed. Each subsequent turn of the shuttle to the left
increases the reverse rate, as -1x, -2x, -4x, -8x, -16x, -30x and -100x.
Normal: Release the Shuttle dial to return to the normal speed of playback.