Filter
Top Products
56
10. Network Viewer and Image Viewer
This section provides instructions for installing and using the Network Viewer, and Image Viewer, which are
included with the 4CH DVR. The programs can be operated by a selected PC equipped with the following
requirements.
1. Intel Pentium 233MHz at least.
2. 32 MB RAM
3. Window 95, 98, NT, and ME.
4. 4 MB Video card capable of 24-bit true color display.
5. 5 MB free hard-disk space for software installation.
6. 10-base T network for LAN operation.
10.1 The Network Viewer
10.1.1 Introduction to Network Viewer
The Network Viewer allows you to potentially access unit of the 4CH DVR from a remote desktop or a
laptop in a TCP/IP networking environment. It can perform the following functions.
View live images from the 4CH DVR
Store, search, and review recorded video from the 4CH DVR HDD.
Change the regular record, event record, and timer properties.
Before you are ready to view images from a desktop, you need to have your 4CH DVR networked by
obtaining a 10 base Ethernet data cable (Standard RJ-45) to connect the 4CH DVR to your LAN/WAN. Now
enter the main menu to set the IP address.
RJ-45 PIN configuration for Ethernet
PIN NO. PIN Assignment
1.
TX +
2.
TX -
3.
RX +
4.
Not Connected
5.
Not Connected
6.
RX -
7.
Not Connected
8.
Not Connected
MV-DR4000
PC
RJ-45
1 2 3 4 5 6 7 8
RJ-45 socke
t