Filter
Top Products
40
NET DHCP:
This option selects enable or disable for the DHCP communication function.
OFF: Disables it.
ON: Enables it.
NOTE: If provided with a DHCP server, the 4CH DVR can get an IP automatically by setting this
option to ON.
NET IP:
This option is used to configure the Ethernet communication settings. This is required for the purpose of
making a network connection. Please consult with a qualified MIS professional to configure it.
IP: XXX.XXX.XXX.XXX
MASK: XXX.XXX.XXX.XXX
GATEWAY:
XXX.XXX.XXX.XXX
HTTP PORT: XXXX
NOTE: The HTTP PORT allows users to set the HTTP port number of 80, 1080, and 2080.
FTP SETTING:
This entry allows users to set the FTP File Transfer Protocol.
ENABLE:
This option is to select enable or disable for the FTP function.
ON: Enables it.
OFF: Disables it.
REC MODE:
This option determines the recording mode to be recorded when the FTP function occurs. There
are 2 levels of recording mode to choose:
ALARM REC and ALL REC.
ALARM REC: Only to record the alarm-event recorded video.
ALL REC: To record all the recorded video.
COMM SETTING
COMM ID : 01
RS232 : ON
RS485 : ON
NET ENABLE : OFF
NET DHCP : OFF
NET IP : SET
FTP SETTING
MAIN PAGE
NAS FTP RECORDING
FTP SETTING
ENABLE : OFF
REC MODE : ALARM REC
REC RATE : 1 F / 1 S
ACCOUNT : SET
MAIN PAGE
SET FTP ON / OFF