Filter
Top Products
57
Physical specification for Ethernet
Wire Type
Cat. 5
Connector Type
RJ-45
Max. Cable Length
30 m
Hub Wiring Configuration
Straight Through
PC Wiring Configuration
Cross Over
NOTE: For more details on network connections, please refer to the following document.
10.1.2 Install the Network Viewer in your PC
Install the Network Viewer from the supported CD-R.
1. Exit all applications currently running in the selected PC.
2. Insert the supported CD in the CD-ROM drive. The program will execute the installation automatically.
Follow the on-screen instructions to proceed with the rest of the installation procedure as they appear.
3. After the installation is complete, pop up the
START menu from your computer, and point to
Programs / 4CH DVR Network Viewer to open up the program selection page as shown below. Click
the
4CH DVR Network Viewer tag to start the 4CH DVR Network Viewer program.
Install the Network Viewer for the ZIP file.
1. Save the ZIP file to your PC and extract the file to a designated directory.
2. Open the extracted folder.
3. Click on the
icon to execute the installation and then follow the on-screen instructions to
proceed with the rest of the installation procedure as they appear.
4. After the installation is complete, pop up the
START menu from your computer, and point to
Programs / 4CH DVR Network Viewer to start the 4CH DVR Network Viewer program.
NOTE: Please make sure the TCP/IP communication software has been properly set and
configured in your computer. To check your TCP/IP settings, refer to the following
document.