Filter
Top Products
67
RJ-45 PIN configuration for LAN Hub
PIN NO. PIN Assignment
1.
TX +
2.
TX -
3.
RX +
4.
Not Connected
5.
Not Connected
6.
RX -
7.
Not Connected
8.
Not Connected
1 2 3 4 5 6 7 8
RJ-45 socke
t
12.1.3 Connect to WAN (INTERNET)
The RJ-45 PIN configuration for connecting to a WAN is the same as connecting to a LAN.
RJ-45
RS-232
ALARM
DC12V
RS-485
hi-z
75
AUDIO
IN
IN
OUT
OUT
MONITOR
ETHERNET
I/O
12.2 Configure Your DVR Network Settings
Upon network hardware connection, you need to activate the network function and configure the
proper network settings of the DVR.
12.2.1 Enable DVR Network Function
Press the Setup button to enter the OSD MAIN MENU. Please use the“<” “>” buttons
and to highlight COMMUNICATION; then press the Enter button to enter the
COMM SETTING page.
Use the “^” “v” buttons and to highlight NET ENABLE; select ON. Then press
the
Enter button to proceed.
MAIN MENU
RECORD
ALARM/ MOTION
TIMER/ SEQ/ TITLE
COMMUNICATION
DISK
SYSTEM
GOTO COMM PAGE
COMM SETTING
COMM ID : 01
RS232 : ON
RS485 : ON
NET ENABLE : ON
NET DHCP : OFF
NET IP : SET
FTP SETTING
MAIN PAGE
ETHERNET ENABLE