Filter
Top Products
AXIS M1143–L
Hardware Overview
Hardware Overview
4 5 6
3
7
8 9
10
1
2
1.
Lid
2.
Focus puller
3.
Zoom puller
4.
microSD card slot
5.
I/O connector
6.
Network connector (PoE)
7.
Network LED
8.
Status LED
9.
Power LED
10.
Control button
Connectors
For technical specifications, see
page 50
.
Network connector - RJ-45 Ethernet connector. Supports Power over Ethernet (PoE).
NOTICE
The product shall be connected using a shielded network cable (STP). All cables connecting the product to the network switch
shall be shielded (STP) and intended for their specific use. Make sure that the network switch is properly grounded. See
Electromagnetic Compatibility (EMC)
for regulatory requirements.
SD card slot - A standard or high-capacity microSD card (not included) can be used for local recording with removable storage.
NOTICE
To prevent corruption of recordings, the SD card should be unmounted before removal. To unmount, go to Setup > System
Option
s > Storage > SD Card and click Unmount.
Control button - The control button is used for:
4