Filter
Top Products
AXIS M1143–L
Accessing the Product
Access from the Internet
Once connected, the Axis product is accessible on your local network (LAN). To access the product from the Internet you must
configure your network router to allo w incoming data traffic to the product. To do this, enable the NAT-traversal fea ture, which
will attempt to automatically con fi gure the router to allow access to the product. This is enabled from Setup > System O ptions >
Network > TCP/IP Advanced.
For more information, please see
NAT traversal (port mapping) for IPv4 on page 39
. See also AXIS Internet Dyna m ic DN S Se rvice at
www.axiscam.net For Technical notes on this and other topics, visit the Axis S upport w eb at www.axis.com/techsup
Set the Root Password
To gain access to the A xis product, you must set the password for the default administrator user root. This is done in the Configure
Root Password dialog, which appears when the product is accessed for the first time.
To prevent network eavesdropping, the root password can be set via an encrypted HTTPS connection, which requires an HTTPS
certificate. HTTPS (Hypertext Transfer Protocol over SSL) is a protocol used to encrypt traffic between web browsers and servers. The
HTTPS certificate ensures encrypted exchange of information.
To set the password via a standard HTTP connection, enter it directly in the first dialog.
To set the password via an encrypted HTTPS connection, follow these steps:
1. Click Create self-signed certificate.
2. Provide the req uested information and click OK.Thecertifica te is created and the password can now be set securely. All
traffic to and from the product is encrypted from this point on.
3. Enter a password and then re-enter to confirm the spelling. Click OK. The password has now been configured.
Note
• The default administrator user name root is permanent and cannot be deleted.
• If the password for root is lost, the product must be reset to the factory default settings. See
Reset to Factory Default
Settings on page 44
.
7