Axis Communications axis TV Cables User Manual


 
AXIS M1143–L
Troubleshooting
Troubleshooting
Checking the Firmware
Firmware is software that determines the functionality of network devices. One of your rst actions when troubleshooting a problem
should be to check the current rmware version. The latest version may contain a correction that xesyourparticularproblem.The
current rmware version in the A xis prod uct is displa yed in the page Setup > Basic Setup and in Setup > About.
Upgrading the Firmware
When you upgrade the product with the latest rmw a re fr om Axis website, the product receives the latest functiona lity available.
Always read the upgrade instructions and release notes available with each new release, before upgra ding the rmware.
To upgrade, follow these instructions:
1. Save the rmware le to your computer. The latest version of the rmw are is available free o f c ha rge from Axis website
at www.axis.com/techsup
2. Go to Setup > System Options > Maintenance in the products web pages.
3. Under Upgrade Server, click Browse and locate the le on your co m puter . Click Upgrade.
After starting the upgrade process, always wait at least 5–10 minutes before restarting the product, even if you suspect the
upgrade has failed.
AXIS Camera Management can be us ed f or m ultiple upgrades. S ee www.axis.com f or m ore information.
Note
Your dealer reserves the right to charge for any repair attributable to faulty upgrade by the user.
•Precongured and customized settings are saved when the rmware is upgraded
(providing the features are available in
the new rmware) although this is not guaranteed by Axis Communications AB .
Emergency Recovery Procedure
If pow
er or network connection is lost during the upgrade, the process fails and the product becomes unresponsive. Flashing red Status
indicator indicates a failed upgrade. To recover the product, follow the steps below. The serial number is found on the product’s label.
1. In UNIX/Linux, type the following from the command line:
arp -s <IP address> <serial number> temp
45