AXIS M1143–L
Accessing the Product
TheLiveViewPage
The controls and layout of the Live View page may have been customized to meet specific installation requirements and user
preferences. Consequently, some of the examples and functions featured here may differ from those displayed in your own Live View
page. The following provides an overview of each available control.
Controls on the Live View Page
The Stream Profile drop-down list allows you to select a customized or pre-programmed stream profile . Stream
profiles are configured under Video > Stream Profiles.See
Stream Profiles on page 15
.
Click Pulse to activate the output for a defined period of time, such as switching on an external light for 20 seconds .
Click the Active/Inactive buttons to m anually s tart and stop a connected device — e.g. switch an external light
on and off.
The Manual Trigger button is used to trigger an action rule from the Live View page; see . Enable this button
from Live View Config > Action Buttons.
Click Snapshot to save a snapshot of the video image. Right-click the video image to save it in JPEG format on your
computer. This button is primarily intended for use when the AX IS Media Co ntrol vie wer toolbar is not availab le.
Enable this button from Live View Config > Action Buttons.
Activate or de-activate IR illumination from Setup > Video > Camera Settings. Move the slider to increase or
decrease the intensity of the LEDs. Enable this button from Live View Config > Action Buttons.
AXIS Media C ontr ol viewer toolbar
The AXIS Media Control viewer toolbar is available in Interne t Explorer only. See
AXIS Media Control (AMC) on page 10
for more
information. The toolbar displays the following buttons:
The Play button connects to the Axis product and starts playing a med
ia stream.
The Stop button stops the media stream.
The Snapshot button takes a snapshot of the video image. The locationwheretheimageissavedcanbespecified
in the AMC Control Panel.
Click the View Full Screen button and the
video image will fill the entire screen. Press ESC (Escape) on the computer
keyboard to cancel full screen view.
The Record button is used to record
the current video stream. The location where the recording is saved can be specified
in the AMC Control Panel.
PTZ Controls
The Live View page also displays Pan/Tilt/Zoom (PTZ) controls. The administrator can enable/disable controls for specified users under
System Options > Security > Users.
8