Filter
Top Products
12
AXIS P7701 - Video Sources
Notes:
• Performing certain actions will empty the unit’s cache and start a new round of autodetection.
• When autodetect is used to connect to a new encoder or camera for the first time, the connection will take longer to
complete.
Resolution - This setting is valid for firmware 5.xx for all codecs. To use a resolution other than the source's default value,
select the custom radio button and enter the required resolution.
The resolutions available depend on the encoder or camera being used. Please see the encoder’s or camera’s online help for the
available resolutions.
Compression - This setting is valid for firmware 5.xx for all codecs. To use a compression other than the source's default
value, select the custom radio button and enter a compression value (0-100).
Audio - Select Audio to receive audio from the video source.
Preset position - If the video source has Pan/Tilt/Zoom capability, it is also possible to select a PTZ preset position view, by
entering the name of the preset here. To add new preset positions, please refer to the manual for the video source. When you
click OK, the PTZ device/camera should then move to the selected view.