Filter
Top Products
26
AXIS P7701 - Resetting to Factory Default Settings
Resetting to Factory Default Settings
To reset the AXIS P7701 to its original factory default settings, go to the System Options > Maintenance web page (as
described in
Maintenance, on page 21) or use the Control button (see page 5) as described below:
Using the Control Button
To reset the decoder to the factory default settings using the Control Button:
1. Disconnect the power cable or if using PoE, disconnect the network cable.
2. Press and hold the Control button while reconnecting power.
3. Keep the Control button pressed until the Status indicator displays amber (this may take up to 15 seconds).
4. Release the Control button.
5. When the Status indicator changes to green (which may take up to 1 minute), the process is complete and the
decoder has been reset. The unit now has the default IP address 192.168.0.90
Note: For other methods of setting the IP address, please refer to the product’s Installation Guide that accompanies the
product, or download a copy from www.axis.com.