Filter
Top Products
25
AXIS P7701 - Alarms
Notes:
• The URL for an HTTP event server should be set to: http://<IP address>/axis-cgi/admin/alarm.cgi
• The TCP alarm port on the AXIS P7701 is configured on the Network Settings page.
3. Configure the Event Type to send a notification message to the event server (i.e. the AXIS P7701).
Notification syntax
The notification message is formatted differently for TCP and HTTP.
TCP notification syntax
Enter the notification message in the Message field, in the format:
sourcename=<name from list>&textmessage=<my message>
For example:
sourcename=DoorCam1&textmessage=Door is open
The message is sent to the TCP port (default 2048) on the AXIS P7701.
HTTP notification syntax
Enter the notification message in the Custom parameters field, in the format:
sourcename=<name from list>&textmessage=<my message>
For example:
sourcename=DoorCam1&textmessage=Door%20is%20open
The message is sent to the HTTP port (default 80) on the AXIS P7701.
Note: All non-alphanumerical characters included in an HTTP notification message must be URL-encoded.
For example, a blank space must be written as %20, as in Door%20is%20open.
For more information, please see the online help. For more information concerning the video encoder or camera, see that
product’s documentation and online help.