A SERVICE OF

logo

4. Physical installation
4.5 Installing the precision frames onto the support structure
What needs to be done ?
After the support structure is correctly installed and provided with the necessary attachment points for the ILite precision frames,
you can start with fastening the precision frames one by one to the support structure. This is done row by row from left to right and
from bottom to top (facing the front of the ILite display to be built). The procedure below describes how to build up the framework
for an 7 x 5 ILite display. Note that the same procedure is applicable for other sizes of ILite displays as well.
CAUTION: Handle the precision frames with care. Do not walk on or drop the frames. Never bang with a
hammer or other heavy duty tools on the precision frames. Never use the precision frames to climb onto the
ILite display.
Necessary tools
•4mmAllenkey.
17 mm nut driver.
13 mm nut driver.
Laser level.
How to install the precision frames to the support structure ?
1. Provide each attachment pointof thesupport structure with afixation plate. See detailed procedure "Installing the fixation plates",
page 24.
2. Place the firstprecision frame uponthe fixation platesin the lower leftcorner ofthe support structure, level out theprecision frame
in all directions and fasten with attachment brackets to the support structure. See detailed procedure "Aligning and securing of
an ILite precision frame", page 28.
Note: Make sure that the top side of the precision frame is upwards oriented.
A
B
TOP
Image 4-11
3. Prepare the next precision frame by removing the left and/or bottom side of the frame, see procedure"Removing the left side of
a precision frame", page 25, and procedure "Removing the bottom side of a precision frame", page 27.
4. Place the prepared precision frame into position on the supp
ort structure. See "Aligning and securing ofan ILite precision frame",
page 28. Remember that the precision frames are placed row by row from left to right.
5. Repeat from step 3 until all precision frames are installed.
A
B
C
Image 4-12
30 R5976522 FIXED ILITE DISPLAY 17/11/2006