Filter
Top Products
7. Servicing
7.5 Hot swap of an ILite tile
Necessary parts
• Flat blade screw driver.
• Wrench10mm.
How to hot swap an ILite tile ?
1. Read an heed the servicing safety instructions.
2. Disconnect the power cord to the tile. Do not remove the power linking cable out of the power branch.
3. Remove the resync-unit from the tile by releasing two screws on the resync-unit.
4. Replace the mall function tile by accessing it from the back with an other tile (see "Tile accessing", page 51)
5. Place the resync-unit on the new tile and fasten with two screws.
6. Insert the power cord into the new tile.
52
R5976522 FIXED ILITE DISPLAY 17/11/2006