Filter
Top Products
Introduction 15
20. LASER
Emits visible laser pointer light for
presentation purposes. See "Operating the
LASER pointer" on the right for details.
21. PAGE
(UP) and PAGE (DOWN)
Operate your display software program
(on a connected PC) which responds to
page up/down commands (like Microsoft
PowerPoint). See "Remote paging
operations" on page 56 for details.
22. DIGITAL ZOOM keys (+, -)
Magnifies or reduces the projected picture
size. See "Magnifying and Searching for
details on the projected picture" on page
41 for details.
23. Source selection keys (DVI, D-SUB,
VIDEO, COMP., S-VIDEO)
Select the corresponding input source for
display. See "Switching input source" on
page 35 for details.
DVI selects DVI-D signal only.
Operating the LASER pointer
The LASER Pointer is a
presentation aid for
professionals. It emits red
colored light when you press it
and the indicator lights up red.
The laser beam is visible. It is
necessary to press and hold
LASER for continuous output.
Do not look into the laser light window or
shine the laser light beam on yourself or
others. See the warning messages on the
back of the remote control and the
enclosed ''User Information'' prior to using
it.
The laser pointer is not a toy. Parents should be
mindful of the dangers of laser energy and keep
this remote control out of the reach of children.
Making the remote control a wired
control
The remote control is equipped with a jack on
the top allowing connection to the projector
with a 2.5mm mini jack cable available in the
market. This helps you easily locate the remote
control when needed as it is connected to the
projector and within the distance no greater
than the cable’s length.