Filter
Top Products
48 Operation
Color Management
The Color Management provides six sets (RGBCMY) of colors to be adjusted to favorite
colors. When you select each color, you can independently adjust its color range and
saturation according to your preference.
To adjust and store the settings:
1. In the Picture -- Advanced menu, highlight Color
Management and press ENTER. The Color
Management page displays.
2. Highlight Primary Color and press / to
select a color from among Red, Yellow, Green,
Cyan, Blue, and Magenta.
3. Press to highlight Range and press / to
select the color range you wish to make
adjustment. The bigger the range, the more
proportions of its two adjacent colors the color
contains.
Please refer to the illustration to the right for how
the colors relate to each other. For example, if you
select Red and set its range at 0, only pure red is
selected. Increasing its range will include both the
red color close to yellow and red color close to
magenta.
4. Press to highlight Saturation and adjusts the
color saturation level by pressing / .
If you select Red and set its range at 0, only the
saturation of the pure red will be affected.
Saturation is the amount of that color in a
video picture. Lower settings produce less
saturated colors; a setting of “0” removes that
color from the image entirely. If the saturation is
too high, that color will be overpowering and
unrealistic.
5. To leave and save the settings, press MENU once
or EXIT twice.
Black Level
Clarity Control
Color Temperature
Picture -- Advanced
Analog RGB
0 IRE
EXIT Back
Normal
Color Temp User_ Fine Tuning
Gamma Selection
Color Management
Color Space Transfer
Signal Shuttle
Default
Gamma 2
Color Management
Primary Color
Range
Saturation
+15
+15
Magenta
ENTER
Red
Yellow
Green
Cyan
Magenta
Blue
EXIT Back