Filter
Top Products
Getting started
The Configuration Manager program is used to set and adjust the VRM system. The program
can be installed on any PC with network access to the computer on which VRM Server has
been started and to the devices that are to be managed.
Starting VRM Monitor
1. Start Internet Explorer on a PC that has network access to the VRM Server computer.
2. In the address bar, enter the IP address of the VRM Server computer and press <ENTER>.
If you are starting VRM Monitor on the VRM Server computer, enter the IP address for the
localhost followed by the port number if the port number is not 80: http://127.0.0.1:<port
number>/
3. Access to VRM Monitor is only possible for authorized persons. For this reason you will
now be prompted to log on using your user ID. If you do not have the appropriate rights,
you cannot view any recordings.
Caution!
Treat your logon details as confidential.
Ensure that the password is not saved in the browser.
The functions described in the following sections are now available.
On the left-hand side, you will see the navigation bar. Click the appropriate entry. The
information is displayed on the right-hand side.
Starting Configuration Manager
To start the program:
4
Click Start, point to Programs, point to Bosch Configuration Manager, and then click
Configuration Manager.
Caution!
If a computer on which VRM Server is started is simultaneously accessed by multiple
Configuration Manager programs, this can result in an inconsistent VRM configuration. Ensure
that different people do not make changes to the configuration at the same time.
Enabling the Cameras tab
Main window > System tab
Enable the Cameras tab, when it is not displayed.
1. Expand the Applications folder.
2. Click Configuration Manager.
3. Click the Appearance tab.
4. Click to check the Show 'Cameras' tab check box.
5. Restart Configuration Manager.
6
6.1
6.2
6.3
Video Recording Manager Getting started | en 13
Bosch Sicherheitssysteme GmbH 2013.01 | v1 | DOC