Filter
Top Products
To configure the recording mode:
1. Under Primary target, select the entry for the required target. All storage systems
entered under Storage Systems will be shown in the list.
2. Under Secondary target, select the entry for the required target. All storage systems
entered under Storage Systems are displayed in the list.
3.
Click
.
See also
– Pool tab, page 26
– Recording Preferences tab, page 34
Configuring automatic recording mode
Main window > Devices tab > Expand > Click Pool n
Note: If you have configured a failover recording mode earlier, this configuration is
overwritten.
To configure the recording mode:
1. In the Recording preferences mode list, select Automatic.
2.
Click
.
See also
– Pool tab, page 26
Configuring logs
Main window > > Service tab > Advanced tab
1. Select all logging options with files that you want to be logged.
2.
Click
.
You can export zip files with the logs from within VRM Monitor.
Activating a transcoding device
Main window > > General > User Management tab
You can activate a transcoding device for a user group. This transcoding device is connected
to the VRM Server computer. You can use the VJT XTC XF as a transcoding device.
To activate:
1. Add the transcoding device to a pool in your VRM System.
Transcoding is now possible for all encoders/IP cameras assigned to this VRM,
independent from their pool assignment.
2. Select the desired user group.
3. In the VRM Rights tab, enable Use transcoder.
Related Topics
– User Management tab, page 30
See also
– User Management tab, page 30
7.10
7.11
7.12
Video Recording Manager Configuring a VRM system | en 19
Bosch Sicherheitssysteme GmbH 2013.01 | v1 | DOC