Filter
Top Products
3. For a camera supporting RTSP:
In the Type list, select RTSP.
For a camera supporting JPEG:
In the Type list, select JPEG.
4. For JPEG: Select the desired image rate.
5. If required, type a name for the camera in the VSG Camera Name column.
6. Click OK.
7.
Click
.
See also
– Add/Edit dialog box (Video Streaming Gateway), page 36
Configuring multicast
Main window > Devices tab > Expand > Expand Devices > Video Streaming
Gateway device > Network tab
For each camera assigned to a Video Streaming Gateway device you can configure a multicast
address with port.
Notice!
If you assign one camera to a Video Streaming Gateway repeatedly or assign this camera to
multiple Video Streaming Gateway instances, the camera can be overloaded. Configure
multicast to avoid.
To configure multicast:
1. Click to enable multicast.
2. Type in a valid multicast address and a port number.
3. If required, configure continuous multicast streaming.
4.
Click
.
See also
– Multicast tabs (Video Streaming Gateway), page 38
Switching on recording
Main window > Devices tab > Expand > Expand Devices > Video Streaming
Gateway device > Recording tab
To switch on:
1. Click the Recording Profiles tab.
2. Select the line of the camera, for which you want to switch on recording.
3. In the Recording list, select On.
4.
Click
.
Recording for this camera starts.
See also
– Recording profiles tab (Video Streaming Gateway), page 38
8.5
8.6
22 en | Configuring Video Streaming Gateway Video Recording Manager
2013.01 | v1 | DOC Bosch Sicherheitssysteme GmbH