Filter
Top Products
Related Topics
– Pool tab, page 26
See also
– Pool tab, page 26
Adding an iSCSI system
Main window > Devices tab > Expand > Expand Pool n > Right-click Storage
Systems > Add iSCSI System... command > Add iSCSI System dialog box
1. Enter the IP address of the iSCSI storage system.
2. Select the type.
Configure the available device types (for example Bosch DLA and DSA (NetApp) storage
systems). Configure other types directly via the management software of the relevant
storage system.
3. Enter the iSCSI storage system configuration password and confirm it.
The VRM system attempts to establish a connection with the device.
The device is added to the system and displayed in the tree structure.
Removing an iSCSI System
Main window Devices tab > Expand > Expand Pool n > Expand Storage
Systems > Right-click desired > Delete command
Adding LUNs
Main window > Devices tab > Expand > Expand Pool n > Expand Storage
Systems >
Add individual LUNs to the system and configure them.
You can add a backup LUN that has been used in another VRM system. If the backup LUN was
formatted with VRM 2.10 or later, it is automatically detected as a backup LUN.
The type of a LUN (standard/read-only/backup) is stored on the LUN itself, so if configuration
is lost, the LUN can be added without risk of data loss. The correct type of the LUN is read out
and is set correctly.
1. Right-click an iSCSI system
and click LUN Assignment... to add new LUNs. The LUN
Assignment dialog box appears.
The left pane displays the LUNs that are available for this target and have not yet been
added to the system. The right pane displays the LUNs that have already been added to
the system.
2. Drag a LUN from the left to the right pane to add it.
3. Activate the Restore database option if you want to retain data when the LUN is added.
4. Click OK.
The LUNs are added to the VRM system. The LUN Assignment dialog box is closed.
Removing Luns
To remove LUNs from the system, open the LUN Assignment dialog box and drag the LUNs in
question from the right to the left pane.
For the LUNs added to the system, make further settings if necessary.
7.2.2
7.2.3
7.2.4
Video Recording Manager Configuring a VRM system | en 15
Bosch Sicherheitssysteme GmbH 2013.01 | v1 | DOC